Custom Equalizer Setting - RCA RCD118 User Manual

RCD118 EN rev.1 8/28/01
Sound Features
EN

Custom Equalizer Setting

1. Press and hold DBBS/E.Q. on the main unit until
E.Q. menu appears on the display or press and hold
DBBS on the remote.
If Custom EQ is selected, go to step 4.
2. Press PRESET or
the menu until the arrow is pointing to Custom.
Flat
Rock
POP
Classic
Jazz
Custom
Set Custom DSP
3. Press SELECT on the main unit or O.K. on the
remote to select Custom EQ.
4. Press PRESET or
DSP.
Jazz
Custom
Set Custom DSP
5. Press SELECT or NEXT
O.K. on the remote to enter custom setting.
6. Press PRESET or
and Treble.
Bass :
-1 dB
Treble :
-1 dB
8
2:13 PM Page 12
7. Press SELECT on th e main unit or O.K. on the
remote to edit the setting. The number will be flash-
ing.
8. Press PRESET
level. Minimum of -14 and Maximum of +14.
to move up or down
9. Press SELECT on the main unit or O.K. on the
remote to confirm settings.
10. Press PREV.
NOTE: The Custom Equalizer Setting must be
done under CUSTOM equalizer mode
adjusted in other equalizer modes (i.e. Flat,
Rock, Pop, Classic, or Jazz).
to select Set Custom
on the main unit or
to select between Bass
or to adjust Bass or Treble
Bass :
+14 dB
Treble :
-1 dB
to exit.
? and not
CUSTOM