Accessories - Hilti Pra 90 Operating Instructions Manual

2.3 Tripod with PRA 92 remote control unit (accessory) 8
The tripod can be operated with the PRA 92 remote control unit. In this case, however, automatic alignment is not
possible and the user has to move the appliance to the desired height himself.
2.4 Protective equipment
Slip clutch in the tripod
en
2.5 Items supplied
1 PRA 90 automatic tripod
1 PRA 84 Li‑ion battery
1 PRA 85 mains adapter
1 Carrying strap
1 Operating instructions
1 Manufacturer's certificate
2.6 Charge status of the Li‑ion battery during operation and during charging when the battery is in the
appliance
LEDs light constantly
LED 1, 2, 3, 4
LED 1, 2, 3
LED 1, 2
LED 1
-
2.7 Charge status of the Li‑ion battery during charging when the battery is not in the appliance
When the red LED on the battery remains constantly lit, the battery is being charged.
When the red LED on the battery is not lit, the battery is then fully charged

3 Accessories

Designation
Various rotating lasers
Remote control unit/laser receiver
Remote control unit
Tripod bag for PRA 90
Universal tripod bag
Battery
Mains adapter
Car battery connector
1 *recommended rotating laser
14
LEDs blink
-
LED 4
LED 3
LED 2
LED 1
Short designation
1
PRA 35
PRA 92
PUA 44
PUA 40
PRA 84
PRA 85
PRA 86
Charge status C
C = 100 %
C ≧75%
50 % ≦ C < 75 %
25 % ≦ C < 50 %
C < 25 %
Description
PR 35*, PRE 3, PRE 38, PR 26, PRI 2
or older models, or models from other
manufacturers.