Advertisement
1.
Quickly press the play/pause button to answer the call, then press it again to hang up
after answering.
2. Press and hold the play/pause button for 3 seconds to reject the call.
The Kogan Bluetooth speaker comes with a standard 3.5mm Aux in jack for connecting with
other non-Bluetooth audio devices (e.g. mobile phones, MP3 players, tablets etc...)
1.
Plug one end of the audio cable into the AUX in jack of the speaker, then plug the other
end into the audio source AUX jack. The green indicator will then remain on steadily.
2. Your speaker will disconnect the Bluetooth connection and will automatically switch to
external source play.
Enhanced mode is designed for a premium level of sound intensity and bass.
1.
Make sure the speaker is on and working properly.
2. Press the volume up and volume down buttons simultaneously to enter into enhanced
mode. The blue indicator will flash to indicate successful operation.
3. Press the two buttons simultaneously to resume default mode.
Make sure your mobile phone has NFC functionality.
1.
Start the NFC from the settings of your phone.
2. Tap your mobile phone on the NFC area of the speaker. The speaker will power on
automatically and the indicator will flash.
3. Five seconds later, tap your mobile phone to the NFC area again to activate NFC pairing.
When your mobile phone asks "Pairing with Bluetooth?", select 'Yes'.
4. Your mobile phone will now be connected and you can play wireless music.
5. Tap your mobile phone to the NFC area again to disconnect the Bluetooth.
Your speaker can support two playback devices at the same time.
1.
Follow step one of how to pair your Bluetooth device (to be known as playback device 1)
to the speaker.
2. Press and hold the play/pause button for two seconds to disconnect the Bluetooth
connection. The speaker will memorize the mac address playback device 1.
3. Follow step one of how to pair your Bluetooth device (to be known as playback device 2)
to your speaker.
4. Then pair playback device 1 again. You can now play music via two playback devices.
Please note: only one device can play audio at a time. You cannot send music from both devices
to the speaker at once. You will need to pause one player if you want to play music from the
other.
Your speaker will power off automatically within 15 minutes if you do not pair any devices with it
to save power. You will need to power the speaker on again to use it.
If your speaker has paired with over 8 devices, there will be 2 or more seconds delay for
scanning and pairing with new playback devices. This is due to your speaker needing to scan the
previously paired devices first to repair with them automatically.
Simply hold the previous track and next track buttons down together for 3 seconds to clean all
of the devices stored in memory and resume default settings.
4
Advertisement
