Page 2
WATER FOUNTAIN LED SPEAKERS Package Contents 2 x Speakers 1 x 3.5mm audio cable 1 x USB power cable Speaker Layout...
Page 3
TURN THE VOLUME TO MINIMUM BEFORE MAKING CONNECTION READ THIS GUIDE CAREFULLY BEFORE MAKING CONNECTIONS. (1) Connect the left speaker to the right with it's audio connection cable. (2) Connect the left speak and computer via the USB cable.
Page 4
(3) Connect the left speaker to the portable player/PC/stereo with the 3.5mm audio cable. SYSTEM SPECIFICATIONS Total Power Output (RMS) 3W + 3W Frequency Response 220Hz – 13KHz Impedance 4 Ohms Dimensions 51mm x 63mm x 220mm Power USB Powered System Requirements USB Port Compatability...
Page 5
TROUBLESHOOTING The Water Fountain LED Speakers are a two-piece multimedia speaker system featuring built-in noise sensors. If you experience problems after installing your new speakers, refer to the following information. 1 – No sound: Check the stereo mini-plug connection and turn connector slightly to ensure proper contact.
Need help?
Do you have a question about the KAWATFTSPKA and is the answer not in the manual?
Questions and answers