Rear Brake Linings - PEUGEOT Vivacity Workshop Manual

SERVICE OPERATIONS

Rear brake linings

- Operate the brake lever and check the
position of the wear mark on the cam
tierod (A) in relation to the mark (B) on the
engine housing.
- If the cam tierod mark is lined up or passes
the wear mark on the engine housing, the
brake lining must be replaced.
Disassembly.
- Disconnect the air hose from the exhaust.
(1)
- Remove the exhaust holder plate.
(2)(2 screw)
- Remove the exhaust. (2 screws and 2 nuts)
26
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
B
2
1
A