Measuring Current - SEFRAM 3515 User Manual

To avoid electrical shock, hazard or damage to meter, do not
attempt to measurement that might exceed 1000 V DC or AC
RMS. Do not apply more then 1000 V DC or AC RMS between
the comment input terminal and earth ground.
Note - If the measured voltage is greater than 30V DC or AC
RMS, the display will show the "

Measuring Current

I
I
I
OK
Please do not measure current from clamp jaw when tempera-
ture probe is connected to meter.
- Don't clamp on any conductor while the meter power on.
- 3515 has only AC current measurement mode.
- Torch lightening when clamping.
Warning
" symbol.
CAT.Ⅳ.600V
CAT.Ⅲ.1000V
with respect to
earth for the jaw.
Tactile Barrier for
hand guard.
Do not hold
the meter across
the Tactile Barrier.
OK
I
I
OK
I+(-I)=0
Caution
7