Samsung ML-6060 Service Manual page 37

Troubleshooting
4-3-10 White Spot
Is it regular
interval of 95.6mm?
Obstacles stuck on OPC's
surface
-> Clean the OPC and
machine or replace
developer.
When putting in/out the
developer, scratch is made.
-> Replace the developer.
4-3-11 Trembling at the End When OHP Printing
'Transparency'
selected via RCP?
Recommended
OHP film used?
Operating
atmosphere is too
high temperature/
humidity
Solve the problem under the
4-12
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
NO
interval of 47.1mm?
YES
D/R in developing unit has
the defect.
-> Replace the developer.
NO
YES
NO
YES
NO
YES
Is it regular
YES
Select 'Transparency'
Use the recommended film.
Transfer
voltage OK? NO
(on the teansfer roller
shaft)
YES
Are the onne tion NO
mode.
Repair or replace the HVPS
Samsung Electronics