Samsung ML-6060 Service Manual page 31

Troubleshooting
4-3-3 Vertical White Line (Band)
White line
missing definitely?
Dirt of dust stuck onto the
window of internal lens of LSU
-> Clean it or replace LSU.
Preventive obstacles through
the path between OPC of
developer and LSU prevent the
path -> Remove the obstacles.
Dirt of dust stuck onto the
external glass of LSU
-> Remove the obstacles.
4-6
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
printout is still has the
NO
same problem even right after
passed through the
YES
Toner material might be stuck to
blade in the developer inside and it
prevents toner supply -> Replace
the developer.
Check both if the toner cartridge's
counter is over its guaranty and
amount of the toner material.
-> Replace the toner cartridge.
Check if the
NO
transfer roller.
YES
The ribs in fuser or toner on the
roller may invoke the image
problem. -> Replace the fuser
cover or the defective part.
The image is originally black or t
black part is far close to the top
-> Use the pattern which has the
image below bigger than 10mm
from the top.
Samsung Electronics