Samsung ML-6060 Service Manual page 22

To replace the Paper Empty (PE) sensor :
1. Release the wire from the two holders.
To replace the pickup holder and the Adjust End
MP:
1. Remove two screws and remove the MPT brack-
et.
2. Raise the pickup holder in the direction of
arrow.
Samsung Electronics
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
2. Unlatch the PE sensor, then take it out.
3. Remove the pickup holder.
4. Remove the Adjust End MP
Disassembly and Reassembly
Adjust End MP
3-15