Samsung ML-6060 Service Manual page 24

To replace the exit board :
Unplug one connector from the controller board
and remove one screw securing the board. Then
release the wire from two holders and take the
board out.
To replace the fuser sensor :
Remove two screws and take it out.
Samsung Electronics
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To replace the Cap sensor :
Remove two screws and take it out.
To replace the actuator empty :
Take the sensor out while you squeeze the both
ends of the sensor.
Disassembly and Reassembly
Actuator empty
3-17