Using The Dock - PSC Falcon 4220 Quick Reference Manual

5. Upon reading a bar code, the device beeps and the green LED
If the bar code scan failed, adjust the reading angle or distance. Make sure that the scanning
beam scans across all bars of the bar code. Refer to
6. The bar code data is entered in the current application. Once a

Using the Dock

Use the dock to charge the batteries and to communicate with a Host
PC. Refer to "Charging the Batteries" starting on page 11.
Figure 16. PDA in the Dock; Top and Rear Views of the Dock
ActiveSync Protocol is used to communicate between PDA and host
PC. Refer to the Product Reference Guide for instructions on commu-
nication wth the Host PC.
Quick Reference Guide
indicator comes on until the trigger is released or after five (5)
seconds. The green LED and the beep tone indicate a good read.
bar code is read successfully, the scanner turns off automatically.
Using the Dock
Figure 15
.
USB Client Port
USB Host Port
RS-232 Serial Port
Battery Charging Contacts
Spare Battery
Charging LED
Power Port
25