Video Input
Input Source Selection (Video, S-video)
Direct Operation
Choose Video or S-video by pressing the VIDEO or the
S-VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
Use the Point
2
press the SELECT button.
or
Use the Point
3
then press the Point
items. Use the Point
and then press the SELECT button.
When video input signal is connected to the
Video
VIDEO jack, select Video.
When video input signal is connected to the S-
S-video
VIDEO jack, select S-video.
Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.44).
36
Downloaded From projector-manual.com Sanyo Manuals
buttons to select Input and
▲▼
► or
the SELECT button.
buttons to select Video and then
▲▼
buttons to select Computer 1. And
▲▼
button to access the submenu
►
buttons to select the S-video
▲▼
Remote Control
VIDEO button
S-VIDEO button
Input Menu
or
Computer
1
Video
S-video