Video Input
Image Adjustment
1
Press the MENU button to display the On-Screen
Menu. Use the Point
adjust and then press the Point
button.
Use the Point
2
and then press the SELECT button to display the
adjustment dialog box. Use the Point
adjust the setting value.
Contrast
Press the Point
Point
button to increase the contrast (from 0 to 63).
►
Brightness
Press the Point
the Point
button to increase the brightness (from 0 to 63).
►
Color
Press the Point
press the Point
(from 0 to 63).
Tint
Press the Point
proper color balance (from 0 to 63).
Color temp .
Use the Point
◄►
level (High, Mid, Low, or XLow).
White balance (Red)
Press the Point
button to deepen red tone (from 0 to 63).
►
White balance (Green)
Press the Point
Point
button to deepen green tone (from 0 to 63).
►
White balance (Blue)
Press the Point
Point
button to deepen blue tone (from 0 to 63).
►
Note:
• When the White balance Red, Green or Blue is adjusted, the Color temp. level will change to User.
• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.38).
• When Blackboard(Green) or Colorboard is selected in Image select, Color temp . will change to
Blackboard or Colorboard.
40
Downloaded From projector-manual.com Sanyo Manuals
buttons to select Image
▲▼
or the
►
buttons select the desired item
▲▼
button to decrease the contrast; press the
◄
button to decrease the brightness; press
◄
button decrease the intensity of the color;
◄
button increase the intensity of the color
►
buttons to adjust the tint value to get a
◄►
buttons to select the desired Color temp.
button to lighten red tone; press the Point
◄
button to lighten green tone; press the
◄
button to lighten blue tone; press the
◄
Image Adjust Menu
SELECT
buttons to
◄►
Reset
Store
Selected Image mode
Reset
Store
Use the Point
◄►
buttons to adjust the
setting value.