To Empty The Tank; To Drain Water (Continuous Drainage) - Ecoair DCW10 SIMPLE User Manual

TO EMPTY THE TANK

When the tank is full, the " FULL " indicator
lights will illuminate and the unit will stop.
Don't remove the tank immediately
if the machine is still running or just
stopping. This may cause some water
to drip.
To pull out

TO DRAIN WATER (Continuous Drainage)

Water can be bypassed the tank by using the hose
provided.
Use a screwdriver to remove the knock-out
at the back. Attach the hose to the
connector through the hole. The hose
should lead to the drain with no sharp bends
and in a downward slope.
TO START
Don't cover the air
vents.
TO MOVE
Unplug the cord and empty the water tank before moving the unit.
Remove and reinstall the bracket for hanging the unit to your new location.
Before operating the unit, make sure the unit is settled horizontally and the tank
is secure in the unit.
To remove the tank, hold the tank grip
then pull it out and hold it with
two hands carefully.
After pouring out the water, clean the
tank and restore in place.
To hold with
two hands
Back
Do not insert small objects into the
vents to avoid damage
Place the unit on a stable, horizontal
surface, or fit on a level wall,
otherwise water may leak.
To restore after
pouring
Knockout
hose
6