User's Manual
4.2 Replacing the SD Memory Card
An SD memory card is provided with the Kodak V1233. Normally it should never need to be
replaced. But if replacement is required, or the memory card needs to be removed for some other
reason, proceed as follows:
1. Push the battery compartment cover forward as shown in Figure 19, and allow it to flip
open.
2. Push the memory card down momentarily to unlatch it.
3. Remove the memory card by pulling it straight out.
4. Insert a memory card as shown in Figure 20.
5. Push it in until it latches into place.
Figure 20
Memory card
PUB-124 Rev A.doc
Digital Camera
40
Kodak V1233