Controls And Their Functions; Functions Of Key Camera Controls - Kodak V1233 User Manual

User's Manual

1.1.5 Controls and Their Functions

Table 2 describes the functions of each control shown in Figures 2 and 3. The items are presented
in order of operational significance.
Table 2

Functions of key camera controls

Graphic Name
Power On/Off
Shutter Button
Flash Selector
Scene Mode
Selector
PUB-124 Rev A.doc
Digital Camera
Function
Press to turn camera power on. The camera will go
into auto mode (the default scene mode), which is
recommended for AFHCAN clinical photography.
Press again to turn camera power off.
Illuminates to show camera power is on.
In scene mode, press halfway to
focus picture and adjust auto
exposure; press fully to take picture.
In video mode, press fully to start
recording, press fully again to stop.
Press to sequence
auto
through the four
available flash
modes.
Press to enter a scene mode menu. Allows user to
select from 23 possible predefined scene modes
(such as sport mode, which is used for photographing
a moving subject).
Press again to return to auto mode. Each time the
Scene Mode Selector button is pushed, a brief
description of the currently selected mode will appear
on the LCD screen.
If in video mode, press to return to scene mode.
Pressing the Scene Mode Selector button is an
alternate way to power on the camera.
The markings on this control illuminate to show that
scene mode is active.
When the camera is off and placed in the dock or
connected to the DC power cable, works with the
Video Mode and Favorites buttons to indicate the
battery charging status.
7
half
full
no flash
red-eye
fill
Kodak V1233
Fig
2
2
2
2