Section 2 - Operating Procedures; Setting Up The Camera; Setting The Date And Time - Kodak V1233 User Manual

Kodak digital camera user manual

Hide thumbs Also See for V1233:

Table of Contents

Section 2 – Operating Procedures

This section provides step-by-step procedures for the most clinically relevant aspects of camera

operation.

Note: These details are provided for initial training and general

reference. In general, users can discover this information for

themselves by practicing with the menu system, experimenting with

the camera, and striving for clinical success.

The following is the procedure for checking and setting the date and time in the camera's

memory:

1. Press the

button to open the menu system.

2. Push the joystick to the right two times to access the Setup menu tab.

3. Push the joystick down seven times to highlight Date & Time.

4. Press the joystick straight down to select the highlighted item.

5. Push the joystick right or left to select (highlight) the item you want to

change.

6. When the selected item is highlighted, push the joystick up or down to

display the desired value.

7. Repeat steps 5 and 6 as needed to set all the values.

8. Press the joystick straight down to return to the Setup menu.

9. Press the

button to exit the menu system.

Note: The V1233 uses a 24-hour system for time, and not an AM / PM

system. Thus 1:00 PM becomes 13:00 in a 24-hour time format, and

8:15 PM becomes 20:15 (just add 12 to the PM times).

PUB-124 Rev A.doc

x 2

x 7

Table of Contents