Human Touch ht 135 Use & Care Manual page 5

take a seat
When changing backrest or footrest direction, there is a slight
pause while the chair gears shift. This is perfectly normal.
To collapse the chair for moving, press down on the
backrest release lever, located on the back of the chair,
then push the backrest down onto the chair seat.
humantouch.com
1. Adjust the footrest height
While sitting in the chair, use the remote
control legs up and legs down settings to
raise the footrest to a comfortable height.
2. Adjust the backrest
Use the remote control recline and
incline settings to adjust the backrest
angle for maximum comfort.
9
Using your Human Touch massage chair
a seat and adjust the backrest and foot and calf massager
to the desired position. Your Human Touch massage chair
helps you feel better from head to toe, using a wide variety
of massage techniques that you control. It's the perfect
way to relax and refresh.
FOR A CALF OR FOOT MASSAGE
1. Deploy the foot and calf massager
Pull up on the footrest release handle (located on the right side of the
footrest).
For a calf massage, rotate the footrest away from the chair until it
clicks into position with the foot and calf massager facing up. Do not
force the rotation of the footrest past the point at which it clicks to
lock. Excess force may damage the mechanism.
For a foot massage, rotate the footrest away from the chair just until
the foot and calf massager is facing up. Do not rotate it so far that
it clicks into position; the footrest should be moving freely for a foot
massage.
2. Insert your calves or feet
For an easier exit, retract the footrest and return the backrest to a full upright
position before getting out of the chair.
Make sure the area behind/underneath the footrest is clear of any obstructions before retracting the footrest.
Do not stand or sit on the foot and calf massager.
is easy. Just take
10