HT-125 Troubleshooting This Troubleshooting Guide walks you step-by-step through the diagnosis of HT-125 customer issues. It is important to follow these steps carefully, to ensure that the problem is diagnosed correctly, and therefore the appropriate repair action is taken. Getting Started 1.
Page 4
To Troubleshoot This Do The Following: Issue: Make sure you are pressing and holding the recline or incline button for at least five seconds; it can take several seconds to My chair won’t activate the actuator. recline/incline If this does not help, the backrest actuator is not working properly.
Page 5
Remote If one or more remote control LEDs do not light when you push the corresponding button, but the function the button controls works properly: The remote control is not working properly. Verify that the remote control cable connection to the backrest cover is secure. If that does not solve the problem, replace the remote.
Page 6
If the foot and calf massager massages only on one side: Replace the foot and calf massager. If when you press the foot and calf massager button on the remote control the foot and calf massager paddles do not move and all foot and calf massager LEDs are all flashing: •...
Page 8
Human Touch, LLC 3030 Walnut Ave. Long Beach, CA 90807 humantouch.com...
Need help?
Do you have a question about the ht125 and is the answer not in the manual?
Questions and answers