Human Touch massage chairs HT-135 Quick Start Manual

Hide thumbs Also See for massage chairs HT-135:

To ensure that Human Touch

products are repaired in a manner that is fully consistent with the practices used during the manufacturing process, Human Touch requires that all

product repairs are performed using only factory-new parts and in accordance with these product repair instructions.

Tools Required: Large flat-head or Phillips-head screwdriver, small Phillips-head screwdriver

NOTE: SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY

GET READY

1. Power off the chair and unplug it.

2. Using two people, turn the chair gently on its right-hand side (Fig.1).

REPLACING THE CHAIR BASE WOOD INSERT

HT-135

Wood insert

SERVICE LEVEL: 2

(Fig.1)

06/01/08

Table of Contents

Do you have a question about the massage chairs HT-135 and is the answer not in the manual?

Page 1 REPLACING THE CHAIR BASE WOOD INSERT HT-135 To ensure that Human Touch products are repaired in a manner that is fully consistent with the practices used during the manufacturing process, Human Touch requires that all ® SERVICE LEVEL: 2 product repairs are performed using only factory-new parts and in accordance with these product repair instructions.
Page 2 3. Using a large flat-head or Phillips-head screwdriver, replace the four large screws you removed from the bottom of the wood insert. 4. Gently return the chair to an upright position. Please send any questions or comments regarding these instructions to: documentation@humantouch.com © 2008 Human Touch , LLC. ™...