Power Failure Transfer - Samsung DCS Compact II General Description Manual

DCS Compact II General Description
l Manual
l Holiday
Operator Group
Any number of stations can contain 30 stations to answer incoming calls. Calls
to this group can be set for distributed, sequential or unconditional ringing.
Operators can use the In/Out of Group feature to meet flexible operator
requirements. Default operator group is 500, but can change the group to
501~519.
Overflow
l
l
Paging
System software allows for the use of four internal and four external paging
zones. Stations can page any individual zone, all internal zones, all external
zones or all zones simultaneously. Using system programming, each station may
be allowed or denied the ability to make and/or receive page announcement
to/from any zone or combination of zones.

Power Failure Transfer

Each 3TRK and 6TRK cards are equipped with two power fail relays. If power
fails, these relays can be used to reroute the first two C.O. lines on the card to
single line telephones. When power is restored to the system, the lines and
stations return to normal operation and calls in progress will be disconnected.
The operator presses the NIGHT key and then dials a passcode to change
day mode to night mode operation.
There are 60 holiday tables. If it is holiday, DCS Compact II operates on
night mode.
Operator
When calls ringing an operator group go unanswered, they can overflow
to another destination after a programmed period of time. The operator
group has its own timer. The overflow destination can be a station or
station group.
Station Group
When calls ringing a station group go unanswered, they can overflow to
another destination after a programmed period of time. Each station group
has its own timer. The overflow destination can be a station or station
group.
4-16
Chapter 4. Features