Front panel
1
1 POWER SWITCH
It switches the amplifier ON and OFF.
2 CLIP LED
When the signal distortion reaches or surpasses 0.5% , the LED lights up. This
means the output level of signal source is too high and it is time to reduce the
input level until the LED turns off.
3 OUTPUT LIMITER LED
When the unit limits the output signal, the LED lights up.
4 POWER LED
This LED lights up when the unit is powered on.
5
LEVEL CONTROLS (For CH 1 & CH 2)
Adjust the output signal level to avoid signal distortion.
3. CONTROL ELEMENTS
2
3
5
4
5
R
LTO
2