Table of Contents
Advertisement
BIOS Setup Utility
INTEGRATED PERIPHERALS
OnChip USB
Controller
USB Keyboard
Support
IDE HDD Block
Mode
PWRON After
PWR-Fail
Setting
All Disabled
All Enabled
1&2 USB Port
2&3 USB Port
3&1 USB Port
1 USB Port
2 USB Port
3 USB Port
Disabled
Enabled
Disabled
Enabled
Off
On
Former-Sts
72
Description
This should be enabled if
your system has a USB
installed on the system
board and you want to use
it. Even when so equipped,
if you add a higher
performance controller, you
will need to disable this
feature.
Port 1 means USB1&2
Port 2 means USB3&4
Port 3 means USB5&6
Select Enabled if your
system contains a Universal
Serial Bus (USB) controller
and you have a USB
keyboard.
Invokes multi-sector
transfer instead of one
sector per transfer. Not all
HDDs support this
function.
The system will switch on
when power comes back
after a power failure.
The system will remain off
when power comes back
after a power failure.
The system will return to
the state it was in before the
power failure when power
returns. (i.e: If the system
was on, it will switch on
again, if it was off, it will
remain off)
SY-7VDA
Note
Default
Default
Default
Default
Advertisement
Table of Contents
