Removing The Graphics Card - Packard Bell oneTwo L5860 Service Manual

Removing the Graphics Card

1. Remove the wall mount plate by following the procedure described on page 36.
2. Remove the hex screws securing the DVI cable to the I/O panel cover (a), then detach the cable from the
panel cover (b).
Quantity
2
3. Disconnect the HDMI cable from the graphics card. Remove the hex screws securing the DVI cable to the
graphics card (a), then detach the cable from the card (b).
Quantity
2
Packard Bell oneTwo L5860 / L5861 AIO Computer Service Guide
Color Torque
Chrome 4.5 kgf-cm
Color Torque
Chrome 4.5 kgf-cm
Part Number
86.80536.7R2
Part Number
86.80536.7R2
39