Power Connector And Cable - HP ProBook 470 G2 Maintenance And Service Manual

Power connector and cable

Description
Power connector and cable
Before removing the power cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Service doors (see
b. Keyboard (see
c. Hard drive
d. Optical drive
e. Top cover (see
f. Display assembly (see
Remove the power cable:
1. Disconnect the cable from the bottom of the system board (1).
82 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
Service door on page
Keyboard on page 46)
(Hard drive on page 38)
(Optical drive on page 42)
Top cover on page 49)
Display assembly on page
35).
36).
75)
Spare part number
767432-001