Table of Contents
Advertisement
Audio Setting – Specifies whether to use composite audio or digital audio input. If you installed composite
video cables then leave this setting at 'Stereo Output'. If you used a Coaxial or a Optical digital audio cable
then please select the AC3 5.1 output; this allows for Dolby 5.1 surround sound and DTS surround sound
playback support.
Set Password – Password protect the DVD Parental controls. This prevents an unauthorized user from
changing the DVD Parental controls.
Once all of the settings on this page have been applied, press the 'Save' button. You may be prompted to
restart LinkTheater, please do so if prompted.
IP Address Settings Menu
This setup page displays your current IP Address setup depending
on your network. By default, DHCP is used to automatically
select an IP Address for you. Some advanced users may want to
specify their own address and can do so by pressing the 'Switch
to Manual' button.
Update Settings Menu
This setup page allows you to check for updates to the
LinkTheater firmware and software. Click the 'Check for
firmware update' text and you will begin the process of locating
and applying a firmware update. This option requires a network
connection that connects to the Internet. Only apply firmware
updates if you have been told to do so by Buffalo Technology's
Technical Support or are positive that a firmware update is
required. Updating a firmware on a device improperly can cause
unexpected behavior.
Network Settings Menu
Now Using – Displays whether you are currently using Wired or
Wireless network functionality.
Network – Select Wired or Wireless depending on how you wish
to connect to your network. If you make a change to this field
you will be required to reboot. After you make a change to this
field, immediately press the 'Save' button below, allow
LinkTheater to reboot, and then return to this page to continue
your network configuration. If you are using wireless and wish
to install an optional external antenna, please see the section
labeled 'External Wireless Antenna Installation'.
AOSS – Specifies whether Buffalo Technology's AOSS will work
on this product. AOSS is a wireless technology and will only work if the network mode is set to Wireless. If
both Wireless and AOSS are on, then the AOSS button on the front of LinkTheater will work. AOSS requires
an AOSS compatible access point or router; it will not work with non-AOSS compatible access points or
routers. Please see the next section labeled 'Using AOSS' for more information regarding AOSS.
17
Advertisement
Table of Contents
