Tagging Pictures For Printing - Kodak EasyShare Z760 User Manual

Tagging pictures for printing

1 Press the Share button. Press
2 Press to highlight Print
3 Press to select the number of copies (0-99). Zero removes the tag for that
picture.
The Print icon
4 Optional: You can apply a print quantity to other pictures. Press
picture. Keep the print quantity as is, or press
until the desired print quantity is applied to the pictures.
5 Press the OK button. Then press the Share button to exit the menu.
* To tag all pictures in the storage location, highlight Print All, press the OK button,
then indicate the number of copies as described above. Print All is not available in
Quickview.
To remove the print tagging for all pictures in the storage location, highlight Cancel
Prints, then press the OK button. Cancel Prints is not available in Quickview.
Printing tagged pictures
When you transfer the tagged pictures to your computer, the Kodak EasyShare
software print screen opens. For details on printing, click the Help button in the Kodak
EasyShare software.
For more information on printing from your computer, printer dock, or card, see
page 43.
NOTE: For the best 4 x 6 in. (10 x 15 cm) prints, set the camera to the 5.4 MP (3:2) print quality setting.
See page 28.
www.kodak.com/go/support
, then press the OK button.*
appears in the status area. The default quantity is one.
Doing more with your camera
to locate a picture.
to change it. Repeat this step
to locate a
38