Initial Settings; Setting The Security Function - Kenwood DDXBH Instruction Manual

INITIAL SETTINGS

Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the <Setup>
screen. (Page 48)
1
DDX672BH
DDX492/DDX415BT/DDX392/DDX372BT/
DDX320BT/DDX315/DDX272
4
<Demonstration> Activate or deactivate the
(Page 49) display demonstration.
<Language> Select the text language
(Page 50) used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]: initially
selected) or English
([English]).
<Angle>* Adjust the panel angle.
(Page 8)
<AV Input> Select an external
(Page 49) component connected
to the iPod/Audio Video
input terminal to play.
<R-CAM Select [ON] when
Interrupt> connecting the rear view
(Page 33 ) camera.
<Panel Color> Select the color of the
(Page 45) buttons on the monitor
panel.
2
Finish the procedure.
The <TOP MENU> screen is displayed.
* Only for D DX672BH .

Setting the security function

❏ Registering the security code (only for
DDX415BT/DDX315)
You can set a security code to protect your receiver
system against theft.
1
Display the <TOP MENU> screen.
On the source control screen:
2
Display the <System> setting screen.
• Press [ ] repeatedly to change the page on
the <System> menu screen.
3
Display the <Security Code Set> screen.
• To clear the registered security code, perform
steps 1 and 2, then press [CLR] in <Security
Code>.