Clock Settings - Kenwood DDXBH Instruction Manual

INITIAL SETTINGS
4
Enter a four-digit number (1), then
confirm the entry (2).
• Press [Clear] to delete the last entry.
• Press [Cancel] to cancel the setting.
5
Repeat step 4 to confirm your security
code.
• When the unit is being reset or disconnected from
the battery, you are required to enter the security
code. Enter the correct security code, then press
[Enter].
❏ Activating the security function
You can activate the security function to protect
your receiver system against theft.
1
Display the <System> setting screen.
On the <TOP MENU> screen:
• Press [ ] repeatedly to change the page on
the <System> menu screen.
2
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for <SI>.

Clock settings

1
Display the <TOP MENU> screen.
On the source control screen:
2
Display the <Setup> screen.
3
Display the <Clock> screen.
4
Set the clock time.
<Radio Data Synchronizes the clock time with
System> FM RBDS.
<OFF> Sets the clock manually. (See
below.)
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to "00".
5
Finish the procedure.
ENGLISH 5