Dodge Charger 2010 Owner's Manual page 92

92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Call by Saying a Name
• Press the
button to begin.
• After the Ready prompt and the following beep, say
"Call.
• The system will prompt you to say the name of the
person you want to call.
• After the Ready prompt and the following beep, say
the name of the person you want to call. For example,
you can say John Doe, where John Doe is a previ-
ously stored name entry in the uconnect™ phonebook
or downloaded phonebook. To learn how to store a
name in the phonebook, refer to Add Names to Your
uconnect™ Phonebook, in the phonebook.
• The uconnect™ system will confirm the name and
then dial the corresponding phone number, which
may appear in the display of certain radios.
Add Names to Your uconnect™ Phonebook
NOTE: Adding names to the uconnect™ phonebook is
recommended when the vehicle is not in motion.
• Press the
button to begin.
• After the Ready prompt and the following beep, say
Phonebook New Entry.
• When prompted, say the name of the new entry. Use of
long names helps the voice recognition and it is
recommended. For example, say Robert Smith or
Robert instead of Bob.
• When prompted, enter the number designation (e.g.,
Home, Work, Mobile, or Pager ). This will allow
you to store multiple numbers for each phonebook
entry, if desired.
• When prompted, recite the phone number for the
phonebook entry that you are adding.