Table of Contents
Advertisement
4
Using the Kodak Photo
Frame Dock
In certain regions, the Kodak Photo Frame Dock is included. By
connecting the camera to the Photo Frame Dock, the camera can be
used like a picture frame to display pictures saved in the camera.
1 Place the camera in the Photo Frame Dock.
2 Plug the Photo Frame Dock's power cord into the outlet.
3 Press the Photo Frame button on the Photo Frame Dock.
NOTE: For details about connecting the camera to the Photo Frame Dock or connecting the power
cable, see the Photo Frame Dock's user guide.
Photo Frame display settings
1 Press the Mode button on the camera to highlight Camera setup
2 Press
to highlight Photo Frame settings
button.
3 Press
to highlight the option you want to change, then press the OK
button.
The picture changes after the set time has passed. The interval
Interval—
can be set for 1 second, 5 seconds, 10 seconds, 30 seconds, 1 minute, or 5
minutes.
Set the order of the pictures to be displayed. Select One time to
Order—
cycle through all the saved pictures once, select Loop to show
continuously, and select Random to display randomly.
Add an effect to be used when the picture is displayed. You can
Effect—
choose from: Fade, Block, Vertical Blind, Center to Left/Right, Left to Right,
Right to Left, Center to Up/Bottom, Up to Bottom, Bottom to Up.
Display Clock—
Analog clock and Big/Small Digital clock.
41
Show a clock with the picture. You can choose from
, then press the OK
www.kodak.com/go/support
.
Advertisement
Table of Contents
