Table of Contents
Advertisement
Setting
Flash Strength Control
Select the brightness of
the flash.
This setting remains until
you change modes or turn
off the camera.*
AF Control
Choose auto-focus
method.
This setting remains until
you change modes or turn
off the camera.
Exposure
Compensation
Choose how much light
enters the camera.
This setting remains until
you change modes or turn
off the camera.*
Set Left Right Button
Set the functions to be
used with
.
This setting remains until
you change modes or turn
off the camera.*
* If Setting Memory (see
you turn off the camera.
www.kodak.com/go/support
Icon
Options
–1.0, –0.7, –0.3, 0.0 (default), +0.3, +0.7,
+1.0, Max Power
At Max Power, the flash is fired at full strength
with no compensation for the pre-flash.
Unavailable in Video, Auto, and Scene modes.
CONTINUOUS AF—When picture taking is
enabled, the focus is continuously adjusted.
SINGLE AF (default)—Correct focus is
obtained once when the Shutter button is
pressed halfway down.
Unavailable in Auto and Scene modes.
For Custom mode—0.0 (default), ±0.3,
±0.7, ±1.0, ±1.3, ±1.7, ±2.0
For Auto mode—0.0, ±1.0, ±2.0
When the majority of the subject is white,
positive compensation prevents the white areas
from turning out gray. When the majority of the
subject is black, use negative compensation.
In backlit situations when you are not using the
flash, positive compensation prevents faces
from coming out dark.
Exposure Compensation (default), Flash
Strength Control, WHITE BALANCE, ISO
SPEED, LATITUDE
Only available in Custom mode.
) is set to ON, these settings remain even if
page 27
Taking pictures and videos
24
Advertisement
Table of Contents
