Turning The Camera On And Off; Setting The Date And Time - Kodak EasyShare LS755 User Manual

Zoom digital camera
Table of Contents

Advertisement

Turning the camera on and off

NOTE: The lens retracts if it encounters an obstruction when you turn on the camera. Make sure
the lens is unobstructed and press the On/Off button again.

Setting the date and time

Setting the date & time, first time
The "Date and time have been reset" message appears the first time you turn
on the camera or if the battery is removed for an extended period of time.
1 SET DATE & TIME is highlighted. Press the OK button. (Select Cancel to set
the date and time at a later time.)
2 Go to step 4 below,
Setting the date & time, anytime
1 Turn on the camera.
2 Press the Menu button to highlight Camera setup
3 Press
to highlight SET DATE & TIME, then press the OK button.
4 Press
to adjust the date and time. Press
setting.
5 When finished, press the OK button.
NOTE: Depending on your computer operating system, Kodak EasyShare software may let your
computer update the camera clock when you connect the camera. See the EasyShare
software Help for details.
www.kodak.com/go/support
To turn the camera on:
On/Off button
Press the On/Off button.
The "Date and time have been reset" message
appears the first time you turn on the camera.
To turn the camera off:
Press the On/Off button.
The camera completes the operations that are in
process and turns off.
Setting the date & time,
Getting started
anytime.
.
to advance to the next
4

Advertisement

Table of Contents
loading

Table of Contents