Troubleshooting - Philips AJH510 User Manual

8 Troubleshooting

Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
No power
• Ensure that the power plug is connected
properly.
• Ensure that there is power at the AC
Mains.
• Ensure that the batteries are inserted
correctly.
No response from the alarm clock
•
Disconnect and reconnect the AC power
plug.
Alarm does not work
• Set the clock/alarm correctly.
Clock/alarm setting erased
•
Power has been interrupted or the power
plug has been disconnected.
• Reset the clock/alarm.
EN
15