Attaching The Dome Cover - Panasonic WV-SF330 Series Installation Manual

Attaching the dome cover

Attach the dome cover to the camera.
The following procedure is required when using WV-SF336, WV-SF335 or WV-SF332. Refer to
page 38 when using WV-SF346 or WV-SF342.
z
Align the indication "OPEN" to the maker
of the camera to attach the dome cover.
x
Remove the cover film from the dome
cover except the dome section.
c
Adjust the direction of the inner dome.
Rotate the dome cover clockwise to adjust
the marker to "ADJUST". The clear dome
and the inner dome can rotate together in
this state. Rotate the dome section of the
dome cover to adjust the direction so that
no eclipse may be caused.
36
SF336 SF335
Dome section
SF332
Marker
Dome
alignment
indication
"OPEN"
Dome
cover