Panasonic WV-SF330 Series Installation Manual page 32

Vertical position (Tilting)
Loosen the tilting lock screws (x2), and rotate
the tilting table to adjust the tilting direction.
(Adjustable range: ±75 °) Since a variable focal
lens is used, it is possible to change the angu-
lar field of view. This lens can also be rotated in
the reverse direction, but the image azimuth is
reversed. In this case, the image azimuth can
be modified when the panning table is rotated
to the direction of clockwise panning (180 °).
<Lens angular field of view (q Angle)>
Horizontal: 27.7 ° (TELE) to 100.3 ° (WIDE)
Vertical: 20.8 ° (TELE) to 73.5 ° (WIDE)
After adjustment, tighten the tilting lock screws (x2) to fix the tilting table.
(Recommended tightening torque: 0.59 N·m {0.44 lbf·ft})
Note:
• When the tilting table is turned to the edge of the adjustable range (±75 °), it must be noted
that the shadow of the dome cover may be projected.
Image tilt adjustment
Rotate the azimuth adjustment ring to adjust the azimuth angle of the image. (Adjustable range:
±100 °)
32
Adjustable range
–100 °
MONITOR
OUT
LOCK
–75 °
Adjustable range
+100 °
FRONT
TOP
BASE-T/
BASE TX
12V=IN
+75 °