Panasonic WV-SF330 Series Installation Manual page 34

• Subj. with low illuminance
• Subj. with reflection or extra brightness
• Subj. through a window
• Subj. with less contrast such as white wall
• Subj. with heavy flicker
Adjust the angular field of view and the focus.
The angular field of view and focus can be adjusted in accordance with the distance between
the camera lens and a photographic subject. These adjustments shall be performed together
with the camera angle adjustment.
FOCUS ADJUSTMENT
LOW
....... | ............
INDICATOR 775
PEAK HOLD 780
q Mount the focus adjustment jig.
w Loosen the zoom lock knob and focus lock knob, and adjust the angular field of view in accor-
dance with the photographic subject by moving the zoom lock knob and focus ring.
Note:
• The focus may not be adjusted appropriately when the zoom ring is positioned at the "W" (or
"T") end. In this case, adjust the focus again by slightly moving the zoom ring to the direction of
"T" (or "W").
e Tighten the zoom lock knob.
r Press the focus assist (F.A.) button.
→ "FOCUS ADJUSTMENT" menu will be displayed.
The focus assist function will be activated to perform the optimum adjustment.
t When the focus ring is positioned near the best focus position, the position will automatically
be memorized as the "PEAK HOLD" position. (The closer the focus ring is positioned to the
best focus position, the greater the "PEAK HOLD" value becomes.)
34
HIGH
BEST
FOCUS
Zoom ring
Focus ring
SF342
SF335 SF332
Focus assist
(F.A.) button
Zoom lock knob
Focus lock knob
q
Loosen
!0
Focus adjustment jig
SF342
Tighten
SF342