Adaptive Beta-Brite 1024 Programming Manual page 38

Remote Control Programming Manual
Draw the following graphic
6
using the keys indicated.
7 Press RUN twice.
Press BACK until PROG
8
TEXT appears.
9 Press ADV.
Hold down SHIFT and
10
press 6 for ROTATE.
Hold down SHIFT and
11 press 0 to insert your
DOTS graphic.
Using CAPS and SHIFT
when necessary, type
Graphics!
12
(Place a space before
Graphics! )
Hold down SHIFT and
13 press 0 to insert your
DOTS graphic again.
Press RUN twice to see
your graphic and text
14
message move across the
sign.
34
PROG DOTS ?
PROG TEXT A
A]
A]
A]
The A is the file name of your DOTS graphic.
A]
T]
Place a space before the word Graphics!
(Otherwise, the first triangle will appear too close.)
A]
NOTE: If you had not placed a space after the first triangle graphic,
the message would look like the following:
Graphics: Example 12 — Mixing text with graphics
SHIFT + Q
[ROT]
A
[ROT][DOT]
A Graphics!
A
[DOT]
Remember:
To just move the
cursor, don't hold
down SHIFT.