Adaptive Beta-Brite 1024 Programming Manual page 13

4 Press RUN twice.
Now that the first message is done, we'll enter a second message which contains upper and lowercase characters.
5 Press PROGRAM again.
6 Press SELECT.
7 Press B.
Type T
Press CAPS to switch to
8 lowercase letters.
Type his is your second
message
9 Press RUN twice.
Beginning text messaging: Example 1 — Using upper and lowercase in messages
THIS IS YOUR
FIRST MESSAGE
Because Automode [AUT] was used in your message (see Step 3), the
text of your message will be displayed in a variety of formats. For
example, one of the formats (or modes) called Scroll moves your
message from the bottom to the top of the sign.
PROG TEXT A
PROG TEXT ?
The A changes to a question mark ( ? ) after pressing SELECT.
B]
"B" is now the file name of your second message. If you pressed
A instead of B, you would have written over the first message.
B]cond message
Your message should look like this when you're done typing.
This is your
You should notice that . . .
• The first message doesn't appear at all. (We'll fix this is the
following example.)
Remote Control Programming Manual
THEN
THEN
second
THEN
message
9