Learning To Scan - WizCom Technologies Quicktionary-II User Manual

To select an entry from a list:
Scroll through the list using 4 or 5 until the entry
1.
you want is highlighted.
Press 2.
2.
To select a command button on the display:
1. Scroll to the button using the arrow keys until the
button is highlighted.
Press 2.
2.
Error Messages
If an error occurs during operation of your Quicktionary-II,
such as scanning a line of text too quickly, an error message
appears. To close the message, press 2.
Scanning Limitations
Quicktionary-II allows you to scan printed text 6-22 points
in size (up to 8mm) in a wide variety of fonts and in all
colors on contrasting backgrounds except:
• red on white
• white on red
• blue on black
• black on blue

Learning To Scan

This section takes you step by step through the process of
scanning text into Quicktionary-II.
Step A. Turn Quicktionary-II On
Before scanning, remove the protective cover from the tip
and press 1 to turn on Quicktionary-II.
Learning To Scan
9