WizCom Technologies Quicktionary-II User Manual page 32

Additional Features
Editing Text
Once you are in edit mode you can edit the text using the
Edit Menu, the Character Bar or Opticard.
• To access the Edit Menu for the editing commands,
press 3.
To access the Character Bar, press 2. The Character
•
Bar enables you to enter text manually to overwrite or
insert characters.
When editing, you can use Quicktionary-II's double-click
feature to jump to the edge of the scanned text. Double-click
7 to jump to the beginning of the text or 6 to jump to the end.
Adding to Scanned Text
You also can scan in additional text while in edit mode,
retaining the original text while inserting the new text at the
cursor location:
1. If the input cursor isn't located at the point where you
want to insert the new text, use 7 or 6 to scroll to the
desired input location.
2. Scan in the new text in the same manner as the
original text.
Note: Quicktionary-II allows you to scan in a maximum
of 200 characters prior to translating the text.
When you scan in text while in edit mode, the new text is
highlighted.
Press 2 to erase the highlighted text (i.e., so that you
•
can rescan it).
• Press any other key to de-highlight the text and scroll
in the direction of the arrow.
32
• Select GO to display the translation of the text.