Troubleshooting - WizCom Technologies Quicktionary-II User Manual

Troubleshooting

Troubleshooting
Problem:
The Quicktionary-II doesn't scan.
Solutions:
• Check to see whether Quicktionary-II is turned on
and is in scanning mode, and the protective cover has
been removed from the tip.
• Check whether you are scanning regular text in
inverse text mode, or inverse text in regular text mode.
• If you previously were using the Opticard, make sure
you switched out of Opticard mode prior to returning
to normal scanning.
Problem:
An error message, "Word not found.", appears on the
display every time you scan a word.
Solution:
Verify that you are using the correct dictionary (e.g.,
English->German and not German->English).
Problem:
The text in the Quicktionary-II display appears upside
down.
Solution:
Adjust the Quicktionary-II to right- or left-handed use.
Problem:
The words you want to scan are in a format too large or
small to scan, or the text is printed unclearly.
Solution:
42
Use the Opticard.