WizCom Technologies Quicktionary-II User Manual page 37

To enter one character at a time:
Press 3 to return to the Input screen, then 2 to
1.
activate edit mode
2. Scroll to the location in the field where you want to
enter a character.
Press 2 to access the Character Bar.
3.
Scroll to the Multiple Characters button and press 2.
4.
The Character Bar toggles to single character mode. It
remains in this mode until you scroll to the Single
Character button and press 2 to reactivate the
Multiple Characters button.
5. Scroll to the required character in the Character Bar.
Press 2. The new character is entered at the cursor
6.
location.
To enter a variation of a character (e.g., in upper case or
with an accent added):
1. Scroll to the letter in the Character Bar.
Press 4 or 5. The Character Bar is replaced by a list
2.
of variations for the selected letter. Pressing 4 places
the cursor on the upper-case variation (see below);
pressing 5 places the cursor on the lower-case variation.
Scroll to the variation you want using 7 or 6.
3.
Press 2.
4.
Note: To toggle out of the sequence for the selected letter
without making a selection, press 4 or 5 again.
To delete a character or characters:
1. Scroll to the character you want to delete. If
Editing Commands
37