WizCom Technologies Quicktionary-II User Manual page 10

Learning To Scan
Step B. Select Quicktionary-II's Default Language
The first time you turn your Quicktionary-II on, you are asked
to select the current dictionary. Scroll to the dictionary you want
using 4 or 5, then press 2. The Input screen appears. A red
light blinks in the tip, signifying that you are ready to scan.
Note: The red light should blink each time you are about
to scan. If the light does not blink, turn your Quicktionary-
II off, then on again.
Step C. Switch to Left-Handed Use (Optional)
If you are left-handed, switch Quicktionary-II to left-
handed use prior to scanning:
Press 3. The Quicktionary Menu appears.
1.
Scroll to Pen Main Menu using 5, then press 2.
2.
Scroll to the Preferences menu, then press 2.
3.
Scroll to the Right-/Left-Handed option, then press 2.
4.
With the Left-Handed option displayed, press 2.
5.
The text on the display turns 180º.
To return to the dictionary, press 3 twice, then press 2.
6.
Scanning instructions are the same for left-handed users.
Step D. Scan Text
1. Place the rollers about 1/2 inch (1 cm.) before the
beginning of the first word of the sample text below:
Quicktionary-II obviates the need for antiquated
2. Hold the Quicktionary-II with the tip at a 75º-90º
angle from the text you are scanning, with the rollers
10
lightly touching the page.
translators.