Kodak EASYSHARE DX3215 User Manual page 58

Camera
Problem
Picture is too light. The flash is not needed. Change to Auto flash
Stored pictures are
damaged.
Pictures remaining
number does not
decrease after
taking a picture.
Camera freezes up
when an MMC/SD
card is inserted or
removed.
48
Chapter 8
Cause
The subject was too
close when the flash was
used.
The light sensor is
covered.
The MMC/SD card was
removed when the ready
light was blinking.
Picture does not take up
sufficient space to
decrease the picture
remaining number.
Camera was not turned
off before inserting or
removing MMC/SD card.
Solution
(page 14).
Move so there is at least 2.5
feet (0.8 m) between the
camera and the subject.
Hold the camera so your
hands or other objects do
not cover the light sensor.
Turn the camera off. Make
sure the MMC/SD card
access light is not blinking
before removing the card.
The camera is operating
normally. Continue taking
pictures.
Turn the camera off, then
back on. Make sure the
camera is turned off before
inserting or removing an
MMC/SD card.