Install The Software - Kodak EASYSHARE DX3215 User Manual

Install the Software

1 Before you begin, close all software applications.
2
Place the KODAK Picture Software CD into the CD-ROM drive.
3
Load the software:
On a WINDOWS-based computer—usually, the first install window
automatically appears. If it does not, choose Run from the Start menu and
type the drive letter that contains the CD followed by \setup.exe. For
example: d:\setup.exe
On a MACINTOSH computer—click Continue on the install window that
automatically appears.
4 Follow the on-screen instructions to install the software. If prompted,
restart the computer when the installation is complete.
To install all applications on the CD, select Typical when prompted.
To choose the applications you wish to install, select Custom when
prompted. See
included on the CD.
NOTE: Electronically register your camera and software when prompted. This
allows you to receive information regarding software updates, and
registers some of the products included with the camera. You must be
connected to your Internet service provider to register electronically.
30
Chapter 5
page 31 for a description of the applications that are