Single Playback Or Continuous Playback (Single/Cont.); Direct Jump; Changing The Output Level; Rewind A Specified Amount Of Time And Playback (Skip Back) - Denon DN-501C Owner's Manual

Single playback or continuous playback
(Single/Cont.)
Select whether to playback one track or to playback continuously.
SINGLE/CONT
Press . during playback, cue, or while
stopped.
The icon on the screen changes.
CNT: Continuous playback
SGL: Single track playback

Direct jump

GOperations on the UnitH
1
TRK NO.
Press
A pop up is displayed.
2
Rotate the jog dial to select a track number.
In 1 second, playback moves to the selected track.
• To select a number from the 10th and subsequent tracks, select
the first digit -> press the jog dial -> select the second digit.
GOperations on the remote controlH
While stopped or in cue, press the number buttons on the remote
0 9
control ( to ) to jump directly to the track you want to hear.
To select the 10th and subsequent tracks, push the number buttons
in the order of 10 digit -> 1 digit.
E.g. Playing back track 12
q Press the number button 1. w
Downloaded From Disc-Player.com Denon Manuals

Changing the output level

Changes the output level of both analog and digital outputs
(vpage 17 "Volume Output").
GOperations on the UnitH
Hold down the
GOperations on the remote controlH
Press the
Rewind a specified amount of time and
playback (Skip back)
The track is rewound for the set amount of time from the current
playback position during playback or pause from an operation on an
external remote (parallel, RS-232C).
The skip back time setting is set in "Skip Back" in the "Preset
Settings" (vpage 15).
GParallel ControlH
When the parallel input normal mode is set, press the
skip back switch on the connected device.
Press the number button 2
within one second. For details, see "Parallel Control" (vpage 43).
GRS-232C ControlH
Send a skip back command.
For details, refer to "RS-232C control" (vpage 37)
SHIFT
button and rotate the jog dial.
VOL + or – button.
26 26
Operations during playback
Playback in the preferred order
(Program playback)
1
Select "Program List" from the menu.
"Program List" is displayed.
• Files are not displayed if no program has been set.
2
Press the jog dial.
The "Program List Menu" is displayed.
3
Select "Insert" and select the file you want to
program.
The "File List" is displayed.
4
Select "Execute" and register files to the "Program
List".
5
Press MENU to exit the "Program List Menu".
2
• Press to cancel the operation and return to the playback screen.
6
Set "Program" in the preset menu to "On".
Tracks are played back in the selected order.
• This function can also be turned ON/OFF using the
button on the remote control.
PROGRAM