Triple Rca Component Hd Video Connector; 3.5Mm Audio Connector - BrightSign XD230 Hardware Manual

pin
1 Red analog video output
3 Blue analog video output
5 Digital ground
7 Analog ground
9 +5V DDC supply
11 NC
13 HSYNC output
15 DDC SCL

Triple RCA Component HD Video Connector

Component video is provided over the VGA connector. To display component video, you will need to use a VGA-to-
component converter. See this

3.5mm Audio Connector

The XD230, XD1030, and XD1230 each have one 3.5mm female audio connector, which transmits a stereo signal. The
full-scale voltage output of the audio is 2V RMS. The output impedance of the audio connector is 32Ω.
Note: The BrightSign expansion module allows you to drive up to three sets of 5
The audio connector has the following pinout:
• Tip: Left audio
• Ring: Right audio
• Sleeve: Ground for audio signal
All information provided in this reference manual applies to products under development. The characteristics and specifications of these products are subject to
change without notice. BrightSign assumes no obligation regarding future manufacturing unless otherwise agreed to in writing. © BrightSign LLC, 2012
Description
FAQ for more details.
BrightSign XD230, XD1030, XD1230
pin Description
2 Green analog video output
4 NC
6 Analog ground
8 Analog ground
10 Digital ground
12 DDC SDA
14 VSYNC output
-- --
Ω
headphones directly.
10