Setting Vari-Program - Kodak DCS 300 Series User Manual

Setting Vari-Program

Ps
MDE
FNC
SET
( ) +/-
When Vari-Program is set, camera settings are automatically reset as follows:
Metering system
Focus area
Flexible Program
Sync mode
Exposure Compensation function
* Settings can be changed as desired in ADVANCED mode.
** In ADVANCED mode, you can change Flash Sync mode to Red-Eye
Reduction, Red-Eye Reduction with Slow Sync, or Slow Sync. (You cannot
set Rear-Curtain Sync with Vari-Program.)
To cancel Vari-Program
Set the Vari-Program indication to the blank area between the
Vari-Program and activate Auto-Multi Program. (The Vari-Program option indication
disappears and P takes the place of Ps in the Camera Status LCD panel.)
In ADVANCED mode, you can cancel Vari-Program by holding the MDE button and
rotating the Main-Command dial until the desired Exposure mode symbol. (P, S, A or M)
replaces Ps.
Press and hold the Ps button and
rotate the Main-Command dial until
the desired Vari-Program symbol
(page 6-4) appears in the Camera
Status LCD panel.
When Vari-Program is selected, Ps
appears as the Exposure indication
in the Camera Status LCD panel.
RESET
BUSY
DCS 315: Center-Weighted
DCS 330: 3D Matrix
Wide [ ]
Cancel*
Normal Sync **
Cancel *
, or Spot with flash
o
and the to cancel
6
6-7