Related Manuals for Eskimo Mako M43Q10
Summary of Contents for Eskimo Mako M43Q10
- Page 1 GetEskimo.com ASSEMBLY INSTRUCTIONS & PARTS EXPLOSIONS Mako Ice Augers M43Q10, M43Q9, M43Q8, M43T8 ARDISAM .com OMM43 Rev. 6/25/08 © Copyright 2008 Ardisam, Inc. GetEskimo.com All Rights Reserved. Printed in USA.
-
Page 2: One-Year Limited Warranty
ONE YEAR LiMitEd WARRANtY Ardisam, Inc., a manufacturing company, warrants this Eskimo Ice Auger to be free from defects in the material or workmanship for a period of one year from the date of purchase. During the one year warranty of this product, Ardisam will furnish 100% parts and labor to correct any defect caused by faulty material or workmanship. -
Page 3: Owner's Responsibility
™ tHANk YOu . . . CAutiON for purchasing an Eskimo® Power Ice Auger from Ardisam, Inc. We have worked to ensure that the ice auger meets high standards for CAutiON iNdiCAtES YOu CAN OR YOuR EQuiP- usability and durability. With proper care, your ice auger will provide MENt CAN BE HuRt iF tHE SAFEtY iNStRuC- many years of service. -
Page 4: Engine Safety Precautions
GetEskimo.com ® Mako Models ™ • Always keep hands, feet, hair and loose clothing away from any water or space heaters, clothes dryer, electric motors, etc.) moving parts on engine and auger. Keep flames and sparks away from engine and fuel to prevent fires. -
Page 5: Operation
GetEskimo.com ® Mako Models ™ OPERAtiON CAutiON StEPS FOR WORkiNG ON ENGiNE OR AuGER dO NOt ALtER/MOdiFY ENGiNE OR AuGER: 1. Turn off engine switch. AvOid iNjuRY! NEvER ALtER OR MOdiFY tHE 2. Disconnect the spark plug wire from the spark plug. ENGiNE FROM tHE FACtORY. -
Page 6: Normal Operation
GetEskimo.com ® Mako Models ™ Filling Gas tank CAutiON 1. Shut-off engine and allow engine to completely cool before refill- ing the gas tank. AvOid iNjuRY! ALWAYS HANdLE FuEL iN A WELL 2. Move to a well ventilated area, outdoors, away from flames and vENtiLAtEd AREA, OutdOORS, AWAY FROM sparks. -
Page 7: Starting And Stopping Engine
GetEskimo.com ® Mako Models ™ StARtiNG ANd StOPPiNG ENGiNE CAutiON • Move engine to a well ventilated area, outdoors, to prevent car- bon monoxide poisoning. AvOid iNjuRY! ALWAYS HANdLE FuEL iN A WELL • Move to an area away from flames or sparks to avoid ignition of vENtiLAtEd AREA, OutdOORS, AWAY FROM vapors if present. -
Page 8: Maintenance And Storage
GetEskimo.com ® Mako Models ™ HOt ENGiNE StARt: CAutiON 1. Open gas cap vent screw all the way (counterclockwise). 2. Continue with Step 5 of Cold Engine Starting. tO PREvENt ACCidENtAL StARtiNG: 3. If engine does not fire, refer to Step 2 of Warm Engine Starting. AvOid iNjuRY! ENGiNE MuSt BE tuRNEd OFF ANd COOL, ANd SPARk PLuG WiRE MuSt BE RE- dO NOt attempt to start engine in the following ways:... -
Page 9: Long Term Storage
GetEskimo.com ® Mako Models ™ Spark Plug CAutiON The recommended spark plug is a NGK BM6A. 1. Check spark plug every 50 operating hours. AvOid iNjuRY! tO AvOid iNjuRY OR dEAtH, NEv- 2. Disconnect the spark plug cap, and clean any debris from ER SiPHON FuEL BY MOutH. -
Page 10: Service, Troubleshooting And Repair
GetEskimo.com ® Mako Models ™ SERviCE, tROuBLESHOOtiNG ANd CAutiON REPAiR SERviCE iNFORMAtiON AvOid iNjuRY! AuGER BLAdES ANd POiNt ARE ExtREMELY SHARP. uSE CAutiON WHEN RE- At Ardisam, we build quality and durability into the design of our MOviNG & REPLACiNG. products;... -
Page 11: Troubleshooting
GetEskimo.com ® Mako Models ™ tROuBLESHOOtiNG PROBLEM POSSiBLE CAuSE REMEdY/ACtiON Engine will not start 1. Power switch off 1. Flip switch to ON position 2. Spark plug wire disconnected 2. Connect spark plug wire to spark plug 3. Out of fuel 3. - Page 12 GetEskimo.com ® Mako Models ™ M43 MAkO ENGiNE PARtS ExPLOSiON Page 1 800-345-6007 GetEskimo.com...
- Page 13 GetEskimo.com ® Mako Models ™ M43 MAkO ENGiNE PARtS LiSt PARt PARt NO. dESCRiPtiON QtY. dESCRiPtiON QtY. 300484 FLYWHEEL, MAGNETO 56105 BRACKET, GAS TANK 300337 NUT, FLANGE M8 300331 GAS TANK 300462 WASHER, ROTOR 300401 GAS CAP, MANUAL VENTING 300413 CLUTCH ROTOR ASSEMBLY 3003321 SHROUD, GAS TANK...
- Page 14 GetEskimo.com ® Mako Models ™ M43 MAkO POWERHEAd & AuGER PARtS ExPLOSiON Page 14 800-345-6007 GetEskimo.com...
- Page 15 GetEskimo.com ® Mako Models ™ M43 MAkO POWERHEAd & AuGER PARtS LiSt PARt PARt dESCRiPtiON QtY. dESCRiPtiON QtY. 300416 GAS ENGINE, 43CC 8955 BOLT 3/8-16 X 1-1/4 SHCS 1027F HANDLEBAR ICE BLADES 8” QUANTUM, COMPLETE SET OF 2 BLADES 3004119 TRANSMISSION COMPLETE ICE BLADES 9”...
-
Page 16: Accessory Chart
All prices are subject to change without notice. When ordering from manufacturer, there is a $10.00 minimum order. For replacement parts, phone 1-800-345-6007 or go online to www.GetEskimo.com GetEskimo.com Eskimo, Division of Ardisam, Inc. 1360 First Avenue; P.O. Box 666 Cumberland, Wisconsin 54829 800-345-6007 · Fax (715) 822-2223 E-mail: info@ardisam.com...
Need help?
Do you have a question about the Mako M43Q10 and is the answer not in the manual?
Questions and answers